| Place of Origin: | Ningbo,China |
|---|---|
| Brand Name: | VAINO |
| Certification: | CE/ISO9001:2000 |
| Model Number: | K3-500 |
| Minimum Order Quantity: | 1SET |
| Packaging Details: | Wooden pellet Wooden case(optional) |
| Delivery Time: | 15-25 working days after confirm order and received deposit |
| High Light: | hydraulic injection molding machine,electric injection molding machines |
||
|---|---|---|---|
Bigger tie bar space high speed injection moulding machinery for Nylon cable tie
specifications
FEATURES OF NYLON CABLE TIE INJECTION MOLDING MACHINE
Optimizing the toggle structure design,the machine reduces mould open stroke against cable tie’s mould,which decrease mould opening time greatly .
Special screw and barrel for nylon cable tie ,the plasticizing capacity is high ,melt speed is fast .
Mould platen,machine frame ,toggle structure parts,rigid strengthened to ensure the life of the machine
Injection speed is faster than normal machine
Control part
It adopts imported plastic injection computer ,with large screen high definition crystal display and human-computer interface in both Chinese and English ,Through CPU independent control and treatment ,it has raised the running speed of the control system and alarming of ultra-high oil temperature ,thus improving the operating speed of the machine ,it uses closed -loop temperature control system to ensure the accuracy and the reliability of the barrel temperature,it is also equipped with the functions of cold-proof start ,alarming and parameter memory for the modeling ,with password protection ,The injection and switch are controlled by imported location ruler
Clamping part
Oil motor drives the adjustment of gear mould ,with good synchronization ,The die can be adjusted automatically in accordance with the set pressure ,which is both convenient and reliable .
Five -suppport crankshaft structure ,the mold and the supports all use the portal structure ,with good rigidity and high fitting precision ,Adopting the computer optimized design,the mold employs definite analysis less system .with double core pulling device,it boasts super sensitive low pressure protection functions,The mechanical ,hydraulic and electrical protections have ensured thye human safety ,The dismountable fill-out hopper can be installed conveniently and automatically ,The moveable platen is running in roll,with little friction and balanced and dependable moving
Description
| SPECIFICATION | ||||
| MODEL | ||||
| Description | UNIT | K3-500 | ||
| INJECTION UNIT | ||||
| Shot volume | Cm³ | 2136 | 2412 | 2704 |
| Shot weight(ps) | g | 1965 | 2219 | 2487 |
| Shot weight(ps) | Oz | 69 | 78.3 | 87.7 |
| Screw diameter | mm | 80 | 85 | 90 |
| Injection pressure | Mpa | 184 | 163 | 145 |
| Injection rate | g/sec | 358 | 404 | 453 |
| ScrewL/D ratio | 23.3 | 22 | 20.7 | |
| Screw stroke | mm | 425 | ||
| Screw speed(stepless) | Rpm | 0～113 | ||
| Nozzle contact force | ton | |||
| Clamping force | ton | 500 | ||
| Opening stroke | mm | 780 | ||
| Platen size | mmxmm | 1190X1160 | ||
| Space between tie bars | mmxmm | 830X800 | ||
| Max.daylight | mm | 1590 | ||
| Mold thickness(min.-max.) | mm | 280-810 | ||
| Hydraulic ejection stroke | mm | 230 | ||
| Hydraulic ejection force | ton | 13.9 | ||
| Ejector pin | Unit | 13 | ||
| POWER UNIT | ||||
| Hydraulic system pressure | Mpa | 16 | ||
| Pump motor | Kw | 45 | ||
| Heating capacity | Kw | 35 | ||
| Number of temp control zones | Unit | 6 | ||
| Oil tank capacity | L | 800 | ||
| Machine dimensions | mxmxm | 8.5X1.8X2.6 | ||
| Machine weight | ton | 18 | ||
Configurations
|
Name |
Configuration |
|
Controller |
KEBA-Austria (8 inch) |
|
Linear Motion Guide |
HTPM--- China |
|
Linear Transducer |
WOOG---Hongkong/ OPKON---Turkey |
|
Hydraulic Motor(charging material) |
INTERMOT-CHINA ITALY JOINT VENTURE |
|
Directional Valve |
NORTHMAN---Taiwan |
|
Main Switch |
LG---South Korea |
|
Single pole Switch |
ANDELI |
|
Proximity Switch |
YINGKE |
|
Seals |
NOK---Japan |
|
Pressure Gauge |
DMASS-Germany |
|
Limited Switch |
SCHNEIDER---France |
|
Oil Hose |
MNULI---Italy/ SW---Italy |
|
Adjustable Motor |
INTERMOT-CHINA ITALY JOINT VENTURE |
|
Lubrication Device |
HERG---Japan |
ADDITIONAL FUCTION
|
Voltage |
415v 50hz 3phase 4line |
|
Hopper with lid material |
SS(stainless) |
|
Alarm system |
Light shining with sound |
|
Heating elements |
SSR |
|
Heating band quality |
Infrared |
|
Condenser |
One middle bigger |
|
Core pull function |
3 hydraulic+3pheumatic |
|
Machine program |
Keba program with 3hydraulic ,3 pheumatic core pull changable |
|
Injection cylinder |
2 |
|
Servo system |
Drive-Huichuan Motor-Saisi-China Gear pump-Sumitomo-Japan Pressure sensor-KAVLICO |
|
Center lubrication system and Manual |
Both |
|
Lubrication pipe |
Plastc pipe with spring protection |
|
Lubrication distribute |
Auto jam detector distribute |
|
Machine bush elements |
Copper |
|
Loading and un-loading care |
For machine lifting purpose, properly positioned and clearly marked ‘hooks’ to be provided. |
|
Voltage stabilizer for PLC |
1000VA |
