|SCREW DIAMETER:||110mm，120mm，130mm||SCREW L/D RATIO:||22L/D,20.2L/D,18.6L/D|
|CLAMP TONNAGE:||10800KN||TOGGLE STROKE:||970MM|
|MACHINE DIMENSION（LxWxH):||9.8X2.4X2.7m||MACHINE WEIGHT:||31t|
injection molding machines,
preform injection molding machine
Oil Temperature Rise Rise Slowly Injection Moulding Machines , Quick Response M - 1100
Detailed Product Description
FEATURES OF NYLON CABLE TIE INJECTION MOLDING MACHINE
Optimizing the toggle structure design,the machine reduces mould open stroke against cable tie’s mould,which decrease mould opening time greatly .
Special screw and barrel for nylon cable tie ,the plasticizing capacity is high ,melt speed is fast .
Mould platen,machine frame ,toggle structure parts,rigid strengthened to ensure the life of the machine
Injection speed is faster than normal machine
It adopts imported plastic injection computer ,with large screen high definition crystal display and human-computer interface in both Chinese and English ,Through CPU independent control and treatment ,it has raised the running speed of the control system and alarming of ultra-high oil temperature ,thus improving the operating speed of the machine ,it uses closed -loop temperature control system to ensure the accuracy and the reliability of the barrel temperature,it is also equipped with the functions of cold-proof start ,alarming and parameter memory for the modeling ,with password protection ,The injection and switch are controlled by imported location ruler
Oil motor drives the adjustment of gear mould ,with good synchronization ,The die can be adjusted automatically in accordance with the set pressure ,which is both convenient and reliable .
Five -suppport crankshaft structure ,the mold and the supports all use the portal structure ,with good rigidity and high fitting precision ,Adopting the computer optimized design,the mold employs definite analysis less system .with double core pulling device,it boasts super sensitive low pressure protection functions,The mechanical ,hydraulic and electrical protections have ensured thye human safety ,The dismountable fill-out hopper can be installed conveniently and automatically ,The moveable platen is running in roll,with little friction and balanced and dependable moving
The excellent chrome,molybdenum and aluminum alloy screw and barrel have undergone the nitriding process ,applicable to various plastic materials , The injection cylinder is parallel of balance to both sides of the barrel ,so as to ensure the non deviation of the nozzle ,good sealing and no leak age of rubber .it is equipped with double guide pillar supporting system ,which can inject under multi-pressure and at various speeds ,it also uses one -stop hydraulic motor pre-injection device .
|servo motor control system||HUICHUAN/PHASE-CHINA||●|
|hydraulic pump||fixed Pump||VICKERS OR YUKEN||/|
|hydraulic direction valve||NORTHMAN-TAIWAN||●|
propotional flow control valve&propotiona
l pressure control valve
HNC-TAIWAN FOR BIG MACHINE,
SMALL MACHINE USE DONGFENG-CHINA
|mould adjust hydraulic motor||INTERMOT-CHINA||●|
|hydraulic safety valve||NORTHMAN-TAIWAN||●|
|High pressure hydraulic pipe||GOODYEAR-USA||●|
|SCREW L/D RATIO||L/D||22||20.2||18.6|
|SPACE BETWEEN TIE BARS||mm||1150X1100|
|PUMP MOTOR POWER||KW||37+55|
|OIL TANK CUBAGE||L||1780|
1. Hydraulic safty protection installed in both front and rear operation door.when any door is open,the hydraulic system will be shut down to provide more safty protect for the operators.
2. Adopt 38CrmoAla Material for key in toogle part.more endurable in using.other supplier may use 40CR or 45# Steel
3. Double oil tank design:because short the distance for the oil return line ,the hydraulic system response is getting more quicker. In the meantime,this design will reduce the oil temperaure ,protect the oil seal.
4. Using bridge design for the injection unit,avoid material leakage if the injection unit is not stay in the same level.
5. Adopt double injection cylinder ,more faster and powerful.avoid any injection less or injection not in the center by single injection cylinder
6. Screw barrel material using top 3 supplier in China
7. Offer 2 hydraulic core pull in the valve panel for future installation
8. Products collection hopper can be dis-assembled and install convenyor in future
9. Install the linear transducer for clamping near the crossing,not easy to get damaged by clearning or maintaiance.
10. Mould thickness fully-automatic adjustment by sensor,wheel and moto,more accurate
11. Install screw rotation speed sensor ,can see the real material charging status in the controller.