PETG PLC Blowing molding machine for 3 extrusin unit , blow mold machine

Basic Information
High Light:

plastic blow moulding machine

,

plastic blowing machine

PETG PLC Blowing molding machine for 3 extrusin unit , blow mold machine

 

 

Advantage:

 

Adopt fast response PLC from Taiwan-techmation

Seperately control for 3 extrusin unit

Layer structure from outer to inner is : PE/REPE/PE

EACH LAYER THICKNESS IS CONTROLLED INDIVIDUALLY

 

 

Machine specification:

Specifications   MP70
Material   PE,PP,(PVC,PA)OPTION
Max container capacity L 5
Number of die set 1,2,3,4,6
Machine Dimension(L×W×H) M 3.4×2.36×2.36
Total  weight ton 4.5
Clamping force kn 70
Platen opening stroks mm 180-480
Stroke of mould board mm 300
Platen size mm 340×420
Max mould size(W×H) mm 400×420
Mould thinkness mm 185-250
Screw diameter mm 70
Screw L/D ratio L/D 24
Plasticising capacity kg/h 65
Number of heating zone zone 3
Extruder heating power kw 14.5
Power of screw-bar machine kw 0.18
Extruder driving power kw 18.5
Number of heating zone zone 2
Power of die heating kw 6.5
Max die-pin diameter mm 130
General power of machine  kw 42.68
Power of the electric motor of oil pump kw 9.5
Air pressure Mpa 0.6-0.8
Average energy consumption kw 23
Using quantity of compression air m3/min 1.5
Using quantity of cooling water m3/min 1.5-2.5

 

Machine parts photo

 

PETG PLC Blowing molding machine for 3 extrusin unit , blow mold machine 0

PETG PLC Blowing molding machine for 3 extrusin unit , blow mold machine 1

Contact Details
Ms. Tina Kui

Phone Number : +8613567488939

WhatsApp : +008613567488939