Baby milk powder container HDPE Blow Molding Machine Extrusion

Basic Information
Place of Origin: Ningbo,China
Brand Name: MEPER
Certification: CE/ISO9001:2008
Minimum Order Quantity: 1SET
Packaging Details: wooden pallet(standard) wooden case(option)
Delivery Time: 15-60working days
Payment Terms: T/T, L/C
High Light:

blow molding machinery

,

bottle blow molding machine

Baby milk powder container  HDPE Blow Molding Machine Extrusion

 

 

 

 

 

Advantage:

 

1. most important for a good EBM machine is the action system and the extrusion system.

   we'r using powerful hydraulic system design with imported valve and pump for stable action

   Adopt China famous brand Gearbox along with Delta extrusion motor ,make sure machine runs   continiously,long life.

 

2. Heavy and stong structure,make sure machine works more faster and stable.

 

3. Special protection for the machine and people

    Sensor in the operating door: if anybody enter the machine,the electricity conneced with the machine will automatic cut down.

   Temperature interlock system:When the material inside the barrel is not reaching the setting temperature,the extrusion motor can never start.that will help the screw and head of the machine.

 

4. Special care for different countries.

    we offer some special design for different countries,in order to matching best performance.

 

5. Easy die head dis-assemble and assemble

 

6. Defleshing function included

 

Center distance introduction:

 

Double head standard Center distance:180mm (160-200mm optional)

Thriple head standard center distance:120mm(100,,125,130mm option)

Four head standard center distance:100mm(90mm as option)

Six head standard center distance:70mm

 
 
 
1. MP55  carriage movement 380MM, produce small items below 2L,max 2L with single head(depends on the design of the products) 
die head have option up to 6 head,have single and double station optional
 
2. MP70 carriage movement 450mm,produce middle size below 5L,max 5L with single head(depends on the design of the products)
die head have option up to 6 head,have single and double station optional
 
3. MP80 carriage movement is 540mm,produce containers below 10L,max 10L with single head(depends on the design of the products)
die head have option up to 6 head,have single and double station optional
 
4. MP70FS  carriage movement is 520mm,customized design machine according to products.
die head have option up to 6 head,single station only,expecially for shampoo bottle,multi-layer
 
5. MP80FS carriage movement is 700mm/800mm/customized design machine according to products.
die head have option up to 6 head,single station only
 
6. MP100D   carriage movement 720
Single and double head optional better for 5L jerrycan  in 2 cavities
 
7. MP85/90/100C  Single station,accumulator head for 20-50L chemical container

 

Machine specification:

    MP80D
Material   PE,PP,(PVC,PA)OPTION
Max container capacity L 10
Number of die set 1,2,3,4,6,8
machine Dimension(L×W×H) M 3.82×2.54×2.5
Total  weight ton 4.5
Clamping force kn 120
Platen opening stroks mm 220-620
Stroke of mould board mm 400
Platen size mm 420×520
Max mould size(W×H) mm 480×500
Mould thinkness mm 225-300
Screw diameter mm 80
Screw L/D ratio L/D 24
Plasticising capacity kg/h 85
Number of heating zone zone 4
Extruder heating power kw 18.5
Power of screw-bar machine kw 0.22
Extruder driving power kw 30
Number of heating zone zone 2
Power of die heating kw 13.5
Max die-pin diameter mm 180
General power of machine  kw 73.7
Power of the electric motor of oil pump kw 9.5
Air pressure Mpa 0.6-0.8
Average energy consumption kw 35
Using quantity of compression air m3/min 1.5-2.5
Using quantity of cooling water m3/min

3.0-5.0

 

Contact Details
Ms. Tina Kui

Phone Number : +8613567488939

WhatsApp : +008613567488939