PC water bottle Plastic Blow Molding Machine 2 Layer material Thriple head

Basic Information
Place of Origin: Ningbo,China
Brand Name: MEPER
Certification: ISO9001:CE
Model Number: MP55D-1
Packaging Details: Wooden pellet,wooden case optional
High Light:

plastic bottle blowing machine

,

plastic blowing machine

PC water bottle Plastic Blow Molding Machine 2 Layer material Thriple head 

 

 

PC water bottle blow molding machine

 

 

 

Brief introduction

CO-EXTRUSION BLOW MOLDING MACHINE FOR MULTI-LAYER BOTTLES

Applicable for single and double station with single to multiple die heads for producing up to SIX-LAYER CONTAINERS (2 TO 6-LAYER CO-EXTRUSION), such as chemical bottles, catchup bottles, or cosmetic bottles. 

2Layer material will be:

Outer layer:PE/PP

inner layer:REPE/REPP

 

you can decrate your bottle with outer-layer (materbatch),inner layer (virgin or recycle material) to save cost and strength the body.

 

 

Advantage:

Mold clamping structure adopting advanced four shafts to clamp the mold ,Can clamp the mold firmly ,stable and reliable ,central mold platen is provided with protruding structure ,binging convenience to installing and dismantling molds, making the design human friendly

 

Piling out system adopting high performance transducer to drive ,saving power by above 30%,can be equipped with 100points wall ,thickness control ,Adopting foreign  famous brand MOOG, improving the uniformity of the finished products ,lowering the weight of the finished products ,Flow and pre-sure proportional control valve. consuming less power ,high output ,of high performance price Ratio.

 

With self-functioned and stable PLC control system ,as well as the integrative of the machine ,electric devices and hydraulic digital controlled and temperature control of PID have been achieved ,The equipment’s operation speed and stability have been greatly improved ,Friendly operational panel ,easy, convenient

 

Shaft insertion structure can work with many models of machines with many die head ,of standardized design ,easy to adjust ,accurate of  body separate  shaft head design ,can be replaced easily ,high quality products

 

Center distance introduction:

 

Double head standard Center distance:140,85,110,125mm as option)

Thriple head standard center distance:80mm

Four head standard center distance:80mm

 

Machine specification:

 

SPECIFICATION Unit MP55
Material   PE,PP,(PVC,PA,PC)OPTION
Max container capacity L 2
Number of die set 1-6
Machine Dimension(L×W×H) M 2.87×2.14×2.28
Total  weight ton 3.5
Clamping force kn 30
Platen opening stroks mm 120-350
Stroke of mould board   230
Max mould size(W×H) mm 360×360
Mould thinkness mm 125-200
Screw diameter mm 55/45
Screw L/D ratio L/D 25/23
Plasticising capacity kg/h 45/25
Number of heating zone zone 3
Extruder heating power kw 13.35
Power of screw-bar machine kw 0.18
Extruder driving power kw 11
Number of heating zone zone 2
Power of die heating kw 4.2
Max die-pin diameter mm 75
General power of machine  kw 34.2
Power of the electric motor of oil pump kw 5.5
Air pressure Mpa 0.6-0.8
Average energy consumption kw 23.9
Using quantity of compression air m3/min 0.8-1
Using quantity of cooling water m3/min 1.5-2

 

 

 

Contact Details
Ms. Tina Kui

WhatsApp : +8613567488939