Payment & Shipping Terms:
Double station high speed HDPE Blow Molding Machine for sports bottle
Double station/Single station
Adopt hydraulic system drive,linear transducer movement for carriage up and down,fully automatic lubrication system with self-detector function.This model is popular use for small products below 2L.
project for eye drop 10ml, 4 head,production capacity :38000pcs/24hours
1. most important for a good EBM machine is the action system and the extrusion system.
we'r using powerful hydraulic system design with imported valve and pump for stable action
Adopt China famous brand Gearbox along with Delta extrusion motor ,make sure machine runs continiously,long life
2. Heavy and stong structure,make sure machine works more faster and stable.
3. Special protection for the machine and people
Sensor in the operating door: if anybody enter the machine,the electricity conneced with the machine will automatic cut down.
Temperature interlock system:When the material inside the barrel is not reaching the setting temperature,the extrusion motor can never start.that will help the screw and head of the machine.
4. Special care for different countries.
we offer some special design for different countries,in order to matching best performance.
5. Easy die head dis-assemble and assemble
6. Defleshing function included
Center distance introduction:
Double head standard Center distance:140mm (70,85,90,120,125,130,150mm as option)
Thriple head standard center distance:90mm(70,75,80,85,95,100mm as option)
Four head standard center distance:80mm
Five head standard center distance:60mm
Six head standard center distance:50mm
|Max container capacity||L||2|
|Number of die||set||1-6|
|Platen opening stroks||mm||120-350|
|Stroke of mould board||230|
|Max mould size(W×H)||mm||360×360|
|Screw L/D ratio||L/D||25|
|Number of heating zone||zone||3|
|Extruder heating power||kw||13.35|
|Power of screw-bar machine||kw||0.18|
|Extruder driving power||kw||11|
|Number of heating zone||zone||2|
|Power of die heating||kw||4.2|
|Max die-pin diameter||mm||75|
|General power of machine||kw||34.2|
|Power of the electric motor of oil pump||kw||5.5|
|Average energy consumption||kw||23.9|
|Using quantity of compression air||m3/min||0.8-1|
|Using quantity of cooling water||m3/min||1.5-2